Enterprise SONiC Bootcamp Register Now

Sign Up
Logo SONiC white

# Open-Source Networking

SONiC Linux
Hands-On Labs

Our free, virtual labs give you a hands-on experience with SONiC, providing a safe environment in which to practice, to make sure that you’re ready to use and manage this powerful open-source network operating system.

Join Free Labs
contact us

Explore Our SONiC FREE Hands-On Labs

By now, we have completed the labs for Modules 2, 3 and 4 of our Enterprise SONiC Linux course.
Let’s put your knowledge into practice with some examples of labs and tasks from these modules.

Module 2 Lab 1: Installing a Switch OS with ONIE

Your task is to install SONiC on a switch in the data center. First, configure and verify the IP addresses of SERVER1 and SW1. Then, install SONiC on switch SW1. Finally, verify the installed SONiC on switch SW1.

Module 2 Lab 2: Configuring Switch Management

You need to configure a switch with pre-installed SONiC by renaming the hostname & configuring the IP address. First, change the hostname of the SW1 switch. Then, configure a static IP address and physical port parameters. Last, revert to DHCP configuration on the port.

Module 2 Lab 3: User Accounts and Authentication Methods

You need to connect a new switch to an existing network and set it up to use RADIUS authentication. First, log in with default privileges to the switch and check the AAA configuration. Then, add the RADIUS configuration on the SW1 switch. Last, set it as the default login option.

Module 2 Lab 4: Zero Touch Provisioning (ZTP)

You need to configure SONiC on multiple devices using ZTP. First, update the DHCP server configuration on SERVER1 to use the ZTP service. Then, enable the ZTP service on the SW1 switch. Last, check the results of the ZTP service on the SW1 switch.

Book Your Hands-On Labs for Module 2

Module 2 Lab

100% Free SONiC Linux Hands-On Labs

Put your knowledge from Module 3 of the Enterprise SONiC course
into practice with lab examples and tasks.

Module 3 Lab 1: CLICK configuration

Configuring a static management address for a switch is a standard procedure for any network administrator. It is important to carefully assign IP addresses to devices to ensure proper control. This can be done using the CLI CLICK interface, which allows easy management of the switch configuration. 

Module 3 Lab 2: Klish (The Management Framework CLI)

As a young IT technician, one of your tasks is to ensure the continuous operation of the network. To achieve this, it is important to back up switch configurations to prevent data loss and minimize downtime in case of failure. In this task, you will perform a backup on the working switch and transfer it to SERVER1 to secure the configuration. In the event of a failure of switch SW1, the saved backup will make it easy to restore the configuration on a new switch.

Module 3 Lab 3: Basic Interface Configuration

You are a network engineer tasked with configuring VLANs. You have two departments: HR and Sales. Each department is on two floors. You need to separate the two departments from each other so that only your department can communicate with each other – HR can’t communicate with Sales, and Sales can’t communicate with HR. The PCs are already configured, so all you need to do is configure the switches. HR should be in VLAN 10, and SALES should be in VLAN 20.

Module 3 Lab 4: Configuring VLANs

You are a network engineer tasked with configuring VLANs for two departments: HR and Sales, each spanning two floors. Your objective is to isolate the departments so that HR and Sales cannot communicate with each other—each department should only communicate internally. The PCs are already configured, so your task is to configure the switches. Assign HR to VLAN 10 and Sales to VLAN 20.

Book Your Hands-On Labs for Module 3

Module 3 Lab

100% Free SONiC Linux Hands-On Labs

Put your knowledge from Module 4 of the Enterprise SONiC course
into practice with lab examples and tasks.

Module 4 Lab 1: MCLAG Configuration​

You are a network engineer tasked with configuring MCLAG (Multi-Chassis Link Aggregation). You have a SERVER switch that must be connected to two switches, SW1 and SW2.

Requirements

1. SW1 and SW2 must be configured as part of an MCLAG.
2. The interfaces Ethernet1 on both SW1 and SW2 should be configured in a LAG and set to trunk mode.
3. On the SERVER, the interfaces Ethernet1 and Ethernet2 should also be configured in a LAG and set to trunk mode.

Module 4 Lab 2: VRRP Configuration

You are a network engineer tasked with configuring VRRP (Virtual Router Redundancy Protocol). You have two switches, SW1 and SW2, connected to a shared switch (SW-N). Additionally, there is an end host (PC1) connected to SW-N, which is already pre-configured.

Your Task

1. Configure VRRP between SW1 and SW2.
2. Ensure that SW1 acts as the Master router.
3. Ensure that SW2 acts as the Backup router.

All devices (SW1, SW2, and PC1) are connected to the pre-configured SW-N switch.

Book Your Hands-On Labs for Module 4

Module 4 Lab

Why Use Our SONiC Hands-On Labs?

The exercises set up in our hands-on labs will give you the skills and knowledge to manage & configure networks with SONiC.

Real Experience

Get hands-on practice with real-life scenarios.

Complete Coverage

From installation to advanced settings.

Flexible Learning

Book lab time to fit your schedule.

Pre-configured Environments

All labs come pre-configured to save you time.

Hints and Tips

Guidance provided at every step for efficient learning.

Correct Answers Provided

Check your work with answers and explanations.

In Collaboration With

Edgecore.svg
SONiC.webp
Broadcom.webp
Celestica.webp
gns3.webp

How Does It Work?

Get started today and enhance your skills with our SONiC Linux Hands-On Training!

Make a Profile

Sign up and create your profile on our training platform.

Book Your Session

Select and book the lab session that fits your schedule.

Enjoy SONiC Linux Hands-On

Join the session and start learning with our interactive, hands-on labs.

What Our Participants Say

Hear from professionals who have transformed their skills and boosted their careers with our SONiC hands-on training.

The SONiC hands-on training was a game-changer for me. The practical labs and real-world scenarios helped me gain confidence in managing and configuring open-source network systems.

Tim Senior Network Architect

I highly recommend this training to anyone looking to advance their networking skills. The labs were thorough and well-structured, making complex concepts easy to understand and apply.

Michael Systems Administrator

The SONiC hands-on training was exactly what I needed. The labs thoroughly prepared me for our upcoming migration to SONiC. I now feel capable of managing open-source network systems.

David Cloud Infrastructure Specialist

Ready to Get Started?

Join our free pre-configured labs today and master the skills needed to effectively deploy and manage SONiC in your network infrastructure. Your future in open networking begins here! 

Start Your Free SONiC Linux Training Now

Troubleshooting & Frequently Asked Questions

Simply create a profile on our training platform, book your session, and start enjoying hands-on learning with SONiC. Sign up today to get started!

Our hands-on labs simulate real-world scenarios, allowing you to practice and apply what you’ve learned in a controlled environment. You will follow step-by-step instructions to complete various tasks, ensuring practical experience.

Absolutely! We cover foundational concepts before diving into
advanced topics.

Each training module is self-paced, allowing you to complete it at your own convenience. On average, a module takes a few hours to complete, depending on your familiarity with the material.

SONiC is poised to grow substantially in the datacenter switch market, with predictions indicating significant adoption in large data center networks in the coming years.

While a basic understanding of networking concepts can be beneficial, our SONiC hands-on training is designed to be comprehensive, catering to both beginners and experienced professionals.

You can try Monsoon, the open-source network monitoring exporter for SONiC. Monsoon is an easy-to-use and affordable network monitoring exporter, that monitors network devices such as routers and switches that are running the SONiC Linux Network Operating System. Monsoon is available from our GitHub site here: https://github.com/STORDIS/monsoon/

Yes, the SONiC hands-on training is completely free of charge.

SONiC Linux VM Free Download

Test a Virtual Datacenter Architecture Running SONiC Linux (by Broadcom)

SONiC Linux GNS3 VM